Metal Roofing Systems Polyurethane Foam Roofing Single-Ply Systems (Hy-Crown) Fabric Reinforced Ply Systems EPDM/Modified Bitumen Recoating System Accessory Products		Metal Roofing Systems
		Conklin's Metal Roofing System was specifically designed to prevent leaks where they most often occur - at the seams. In addition to outstanding protection against water penetration, the Metal Roofing System extends the life of your roof by resisting weather extremes and reduces air conditioning costs by reflecting the sun's harmful rays.  Another benefit of the MR System is cooling the roof surface and reducing energy consumption to cool the buildings interior. An independent research study in Florida concluded that by installing the Conklin MR System, over 25% average reduction in summer cooling energy occurred. This translates to reduction of utility costs.
		Complete Coverage in Five Easy Steps
		The Metal Roofing System is easy to install and won’t disrupt your business or work. Here’s how this innovative system works:
		Step 1: Surface Preparation
		Loose rust and scale are removed by high pressure washing.
		Step 2: Metal Ready®
		The roof is primed with Metal Ready®, Conklin’s rust inhibiting metal primer. It forms a strong, protective barrier to inhibit rust from forming on steel surfaces. Even where rust has a foothold, Metal Ready’s special anticorrosion agents act to inhibit further spread of the oxidation process.
		Step 3: Seal All Fasteners with Kwik Kaulk®
		All fasteners are sealed with Kwik Kaulk®, Conklin’s acrylic caulking compound.
		Step 4: Treating the Seams
		The base coat and Spunflex fabric reinforcement or Conklin butyl tape are applied along all vertical panel joints. Conklin butyl tape is used on horizontal seams.
		Sealing Vertical Seams
		Sealing Horizontal Seams
		Sealed Roof Before Final Coat
		Step 5: Reflective Top Coat
		A white reflective top coat is applied over fabric-reinforced joints and screws. The white reflective top coat has 85% reflectivity and 338% elongation.
		Conklin offers a good-better-best product selection to meet your metal roofing needs and budget.
		Benchmark
		Benchmark is Conklin's premium roofing system for metal roofs, providing the toughest protection available. This 100 percent acrylic acrythane coating offers superior elongation and tensile strength, with a solar reflectance of 85 percent for maximum energy efficiency. Benchmark meets the strict code requirements of the Uniform Building Code and is recognized by the International Conference of Building Officials and other authorities.
		Rapid Roof III
		Rapid Roof III, the third generation of Conklin's original roof coating system, is designed to be lightweight, flexible, seamless and weatherproof. Comprised of a fire classified light tan base coat, and a highly reflective standard white top coat with a solar reflectivity of 84 percent. Rapid Roof III cures to a tack-free, dirt-resistant finish. Rapid Roof III also offers the option of light blue, light tan and light gray top coats
		Rapid Roof HV
		Rapid Roof HV delivers the same waterproof, seamless qualities as Conklin's other acrylic elastomeric coatings, but at a lower price because it doesn't carry the costly code approvals and fire ratings. Rapid Roof HV has a solar reflectance of 82 percent.